rat[LAB] Studio Presents Advanced Façade Design

Parametric and Algorithmic Design Techniques can help develop smarter facades that can perform a multitude of tasks in an optimized way, in fact, parametric design opens up vast possibilities of controlling performance-based factors right from the early design stage of a façade project, yielding results that speak beyond mere aesthetics, writes Ar. Sushant Verma, rat[LAB] Studio

The role of a façade is as complex as the building itself as it needs to strike a balance between all the parameters such as aesthetics, visual character, structural stability, solar heat gain, daylight filtration, visibility, thermal comfort, branding and programmatic zoning, among other aspects. Due to its complex nature, usually, designers opt to harness the potential of a façade to either aesthetic effects or to building performance. Very rarely, the two merge, although that’s the intent ideally. But what stops us to integrate all aspects of a façade in design? Is it the complexity of the problem or is it the inadequate knowledge of available design tools? In fact, both these issues can be sorted with the help of a specialist.

A typical parametric workflow
Fig 01: A typical parametric workflow where façade is designed in accordance with Geometry, Analysis and Construction Drawings (On-going project by rat[LAB] Studio)

Emergence of façade design specialists

We are currently in the age of specialization in architecture where multiple streams within the profession have emerged to create an inter-disciplinary and multi-layered process of design. This has led to smarter projects as each specialist, be it energy consultants, structural designers, façade designers, project managers, and architects, play their respective roles to collaborate on a project.

While there has been a lot of progress in the construction, supply and material segment of this domain, very few are focussing on a façade’s design aspect. Façade design specialists can take up design and building of facades with their association of engineers and vendors. In fact, many designers have taken up the expertise of Façade Designing by use of Computational Design Techniques, namely Parametric Design and Algorithmic Design. This allows collaborations with the architects, wherein a Façade Design Consultancy can be provided which focuses on Parametric Design methods that allow a wide range of design possibilities and fabrication options.

Parametric Form Development of skyscraper in Hong Kong
Parametric Form Development of skyscraper in Hong Kong

Parametric workflow for facades

Parametric design is not about the software platform only but is based on the way of designing. One can create their own customised ‘software platform’ using various coding languages, which designers are slowly getting acquainted with. Some of the coding languages that allow a parametric workflow are Python, C#, C++, VBnet; these can be embedded in one of the commonly used and popular parametric design tool Grasshopper, which is an extension to NURBS-based 3D modelling software Rhinoceros.

Other evolving parametric tools include Dynamo, Generative Components, Maya, CATIA, among others. One can extend the workflow for parametric design using coding languages that are supported by conventional design tools. Coding is one of the most popularized skills in the West today, and is gaining popularity amongst designers across the globe, as it can allow them to extend their creativity across numerous avenues. Parametric workflow allows designers to take objective and informed decisions, where every geometry and information is associated with the building through parameters that can be controlled to produce a multitude of outputs and options. Analysis and fabrication data can also be linked in the workflow along with key parameters such as material quantities and costing.

In a nutshell, parametric workflow harnesses the potential of computer to analyse big data and visualize complex forms and associates them to provide an integrated solution. This is an efficient use of Computational Design for Facades and Building Skins.

Parametric Workflow using Grasshopper3D to control Design Data for skyscraper
Parametric Workflow using Grasshopper3D to control Design Data for skyscrapper

The master control

Parametric workflow allows designers to rapidly iterate forms based on parallel feedbacks on cost, structural feasibility and building performance to tweak the designer sketch-board through a Parametric Master Control. This non-linear workflow allows holistic development of the project based on a large set of parameters by linking them to each other through a smart use of simple algorithmic workflow. However, it is important that the set of parameters are quantifiable data. This maintains the integrity of the project while allowing quick iterations and rapid prototyping. It also allows incorporation of changes in brief that can be easily accommodated even at a later stage of project, without disrupting the project workflow.

One of the recent projects by rat[LAB] studio was a Form and Skin development for a skyscraper project in Hong Kong where Parametric Design Methods were used to design an environmentally conscious adaptive[skin] that could create a breathing effect using sustainable design strategies. The studio won the competition project and was awarded the First Prize in the International Competition for design of the Skyscraper, and rat[LAB] was invited to collaborate on this project. An algorithmic process of designing has been followed through creating a differentiated array of a hexagonal floor plate that variably changes scale based on environmental criteria, functional aspects, structural logics as well as aesthetic parameters. A central core holds the two towers that rises about 290m above ground level carrying a twisting form encapsulated by a triangulated exoskeleton, leaving clear floor plates for functional distribution. The rotational and scaling aspects of floor plates around the central core creates a folding form that grows high to create an amorphous building form with external vertical courts and atriums that spiral along the towers in two different directions as per climatic aspects. A subtle rotation of floor plates that start from 0 degree at ground level to 90 degree at the top, is designed clockwise and anti-clockwise in Towers A and B, looking at shadow studies, solar insolation, local and global wind movements and structural logics.

Parametric Facade Development of skyscraper in Hong Kong
Parametric Facade Development of skyscraper in Hong Kong (Parametric Consultancy by rat[LAB] for Midori Architects, Chennai)

A multi-objective optimization is carried out to create a novel form where two dynamic looking towers connect at three distinct levels with structural bridges formed by triangulated trusses that stretch out from triangulated exoskeleton. While 70% of the facade panels are static and their size determine the amount of light and heat on the building facade, 30% of the panels are designed as Kinetic Panels to control the amount of daylight and solar insolation required by the building for different parts of the day and seasons.

The adaptive façade system used in the project has been an evolving research of the studio demonstrated through adaptive[skins] project research at MAK Center, Los Angeles (2014), initiated at AA School of Architecture, London (2012), and articulated in the building skin design of Tokyo Shopping Center project by the firm in 2016-17.

The project was started in London as part of an academic research and built upon in various iterations in Los Angeles later on. It was started with a sole vision of challenging the static built environment against the dynamic natural environment, where numerous layers of architecture come together to make a building function in negotiation with changing environmental parameters such as sun, rain, and wind. The research has taken a series of iterations from 2012 to 2014, with the latest developments shaping up in Los Angeles at The MAK Center. A dynamic façade system was designed as a proposal for MAK’s Exhibition Space at the site of Mackey Apartments, which was designed by one of the pioneers of Modernism – Rudolph Schindler in 1939.

Parametric Facade Development of skyscraper in Hong Kong
Parametric Facade Development of skyscraper in Hong Kong (Parametric Consultancy by rat[LAB] for Midori Architects, Chennai)

An international collaboration of rat[LAB] with Takumi Yoshioka and Masaki Morinobu of Nonscale Co., Tokyo led to a proposed shopping centre for Japan & India at the SC Fair 2016 held at Yokohama. The project is designed by Nonscale Co. while the highlighting roof-structure has been envisaged and designed by rat[LAB]. This large span adaptive roof structure inherits hybrid qualities of a tensile and a grid shell, with automated shading devices inbuilt in the structure.

dynamic façade at MAK’s Exhibition
Proposal for dynamic façade at MAK’s Exhibition Space in Los Angeles, California

The complex roof structure has been designed to adapt to dynamic environmental conditions. The multi-functional shopping centre will be sheltered by a large span skin which incorporates origami shading modules with a transparent material for a visual connection. It will be ventilated like any outdoor space with controlled temperature and better comfort levels.

Environmental Analysis (SC Fair 2016, Yokohama)
Environmental Analysis (SC Fair 2016, Yokohama)

Design management

In another on-going façade project, the studio is following a non-linear workflow to employ three geometrical systems and providing façade solutions with integrated cost and energy analysis using an algorithmic approach.

In the design process of the facade, a set of parameters are set as geometric variables using Parametric Design Toolset. They act as objective information in the algorithm used to generate facade options. For example, angular rotation of bricks is used as a geometric parameter where angle of each brick is controlled as per visibility and light studies that follow and provide a feedback look back into the algorithm.

The next step is to develop the algorithm that brings all the variables within a comprehensive equation (or script) to feed them to parametric tools for computing and analysis. A design language or a geometric syllable is decided to be mapped on the algorithm. The output façade options are then analysed for structure, environment and cost.

Performance analysis is the most critical part of design process. It requires an objective critic and computational framework provides an integrated method to blend design and engineering.

Parametric geometry expressed using differentiated rotation of bricks creating a wavy effect in facade
Parametric geometry expressed using differentiated rotation of bricks creating a wavy effect in facade

Parametric facade iteration with hexagonal perforations of different sizes based on the parameter to produce an image of waves
Parametric facade iteration with hexagonal perforations of different sizes based on the parameter to produce an image of waves

Energy Analysis: The energy performance of the building is analysed for further optimisation; aspects concerned are solar insolation, ventilation, temperature, daylight factors etc.

Cost Analysis: The cost estimation of the facade plays an important role in shaping the facade. With integrated BIM, cost estimation can be obtained in real time for every iteration.

Structural Analysis: The structural feasibility of the facade can be tested using advanced computational tools. Specific aspect of the structural system such as shear stress, bending moment, load etc can be obtained with a high degree of certainty.

Construction Methodology: The most suitable construction system for the design options can be evaluated and fabrication data, assembly sequence and construction methodology can be extracted from the parametric workflow, if used smartly.

Custom reports can be generated from the analysis for consultation with clients and engineers, based on which, primary parameters can be tweaked to further optimise the design options.

A fluid morphology is created for visual effect using variable vertical fins placed along horizontal transoms
A fluid morphology is created for visual effect using variable vertical fins placed along horizontal transoms

Perforated Façade for a boutique hotel in New Delhi by rat[LAB]
Perforated Façade for a Boutique hotel in New Delhi by rat[LAB]

Although, these are listed as succeeding steps, the parametric workflow is a non-linear process which helps designer shift from one aspect of the design to another for parallel ‘design, iterate, analyse’ process.

In another recent façade project by the studio, the skin of the building is envisaged as a porous surface with punctures made through CNC cutting of MS Sheets. Interpreting from the brand identity of the client, a pattern is generated parametrically, with variable punctures emerging from a central focal point, spread on the full façade of 3,300 sq.ft. as a pattern that cuts direct glare, brings in indirect illumination into the space, as well as marks the building with a highlight feature on the busy street. The pattern is fragmented into 40 panels of regular sizes placed on a MS Grid Framework, anchored to the building slabs. Each panel is numbered for quick sorting and site assembly, which come together to form a patterned façade for a banquet cum boutique hotel space.

Computational Design Workflow to integrate Project Data for Façade Project in Gurugram
Computational Design Workflow to integrate Project Data for Façade Project in Gurugram
(Façade design by rat[LAB] in collaboration with Design Plus Architects, New Delhi)

Parametric Façade for Molded Dimensions Factory
Parametric Façade for Molded Dimensions Factory, Gurgaon, designed by rat[LAB] in collaboration with Design Plus, New Delhi. A computational workflow is followed in design process to extract fabrication data and environmental analysis of façade parametrically.

In another project by rat[LAB] in collaboration with Ar. Abhishek Bij of Design Plus in New Delhi, for a Molded Dimensions Factory in Gurgaon, a prominent part of the façade is designed to create an aesthetically dramatic effect, while optimizing building performance and fabrication cost. A differentiation among members of façade is being parametrized through an algorithm that calculates the running length and cost of various building members. This allows us to change the base parameters (such as angular variation, dimensional shifts, etc.) and study its changing effect on fabrication cost and environmental performance. Multiple platforms are integrated to evaluate the results in real-time, as we change the influencing parameters and create a range of designs. This allows choosing an optimum design for the façade, based on the set criteria. The algorithm is also developed to extract fabrication data from the parametric model, saving on design and production time, thereby cutting down on project costs.

Sushant Verma
The possibilities of designing smarter and efficient facades is made possible today with the aid of parametric methods. One of the key advantages of following a Parametric & Algorithmic Workflow for Façade Design is the association of project brief, fabrication data, project costs, material calculations, analysis data and project visuals into single non-linear workflow where Façade Designer plays a key role to control and curate the workflow. This bridges the gap between designers, fabricators and engineers to give a streamlined output

Sushant Verma is a Design Entrepreneur, Architect, Computational Designer & Educator, currently leading rat[LAB] Studio.
Click Here
To Know More / Contact The Manufacturer
Please provide your details we will contact you as soon as possible
Please let us know your name.
Please let us know your Designation.
Invalid Input
Please let us know your email address.
Please let us know your City.
Please let us know your Contact Number.
Please brief your query.
Our other value-added services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Equipment & Machinery
Invalid Input
Building Products
Invalid Input

The Metallic Look

The most common material options for metal cladding are galvanized steel, aluminium, stainless steel, zinc, copper, titanium, etc, each of which have their own strengths and weaknesses; the choice of material will be influenced by the desired aesthetics Read More ...

The Fabric Wave

A wave pattern façade was planned to camouflage the existing facade and raise the design quotient. The design team played with tensile fabric to achieve the flexibility and fluidity, which also creates a barrier from the west side sun, directly hitting the façade Read More ...

Solid Aluminum: A Clear Winner in High Rise Buildings

Solid aluminum is the material for future facades; its versatility, economics and fire compliant properties make it a clear choice for sustainable façade design, creating long-term value for the building. It is also being successfully used as a material for ventilated Read More ...

Forensic Analysis of Fire-Resistant Facades

Fire safety of a building façade hinges on the material used for the façade and the fixing structure integrity during fire; however, almost 99% of the time we select a façade material by looking at the samples and its technical datasheet; but we fail to analyze the whole Read More ...

Kingspan Dri-Design Impresses

Designed by Brian Dunlop Architects, Kilkenny Cinema in Ireland is the new landmark building in the heart of Kilkenny, made outstanding with the distinctive Kingspan Dri-Design Shadow Rainscreen Façade System Read More ...

Where Quality Meets Vision

Ahmedabad-based PSP Projects Ltd is one of India’s fastest growing multi-disciplinary construction company, offering a diversified range of construction and allied EPC services across industrial, institutional, government, and residential projects Read More ...

Solid Surface Complete Design Freedom

From the robust stone face on buildings that project the strength and secure nature of the organizations that inhabited them, to the glass fronts which essentially promote transparency and the approachable attitude of the corporate world Read More ...

GFRC: The Wonder Material for Exteriors

Façade Consultant Ar. Harish Gupta, Habitat-n-Skins and Ar Chintan Shukla, Design Head at GVK, discuss the design concept of T2 terminal at Mumbai’s Chhatrapati Shivaji Maharaj International Airport (CSMIA) and the innovative and beautiful application of GFRC Read More ...

Maheshwari Architects Influencing Design

The distinctive profile of new Unimark Asian’s B+G+17 headquarter office in the CBD area in Kolkata is derived from incorporating triple height external terraces in a dynamic way by stacking five glass boxes to complete the structure. The core is placed Read More ...

Morphlab: Designing Responsibly

The raw textures of concrete and wood help the building blend into the urban fabric as if emerging from the natural landscape. Covering the flanks of the building are undulating wooden panels that aid in reducing solar gains across the surface, thereby reducing Read More ...

Pentaspace Design Studio Thinking Ahead

With more and more structures becoming high rise in the country; use of faster and efficient technology for designing and constructing the façade which would require minimum maintenance, enable speedy construction with less labour-intensive methods, are the way forward Read More ...

Avinash Khosla and Associates Environmentally Progressive

The external facade of the building uses a combination of reflective glass, grit texture and ACP cladding in horizontal and vertical elements to bring out the bold massing of the structure. Combination of the granite steps leading to the podium and the light smooth Read More ...

Kembhavi: Creating a Lighting Spectacle

Designed by Kembhavi Architecture Foundation, the 60m high Vertica, with its stunning pinnacle design, understated straight-line design and elegant linear guise, inspired by the neighbouring heritage site - Thousand Lights Mosque - has glazed crowns, color changing LEDs Read More ...

DFI: Making a Paradigm Shift

Gulf Adiba in Gurgaon is a proposed IT/ ITES office designed by Design Forum International (DFI) on a 4,000 sqm industrial plot within a dense office complex. The lack of a site context with no significant views determined the design development as a distinctive Read More ...

Mixed Folios: Amalgamating the Old with the New

The National Bal Bhavan in New Delhi is a modest sports centre, amalgamating the grace of the yesteryears with a contemporary finesse. Originally built and inaugurated by the late prime minister Pt. Jawarhar Lal Nehru in 1956, the structure is a witness Read More ...

Renesa: Concoction of Design Theories

The Pink Zebra designed by Renesa Architecture Design Interiors Studio sits on one of the oldest buildings of Kanpur, making a transition from the old to the new through design and re-architecture. The site is a fascinating experience of cultivating the idea Read More ...
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture

New Building Material & Construction World

New Building Material & Construction World

Lifting & Specialized Transport

Lifting & Specialized Transport

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week