Lingel undertakes glazing of GIZ Headquarters in New Delhi

The job involved retrofitting of triple glazed noise proof windows and a sun heat-controlled conservatory at the GIZ Headquarters (business wing of the German Embassy) in New Delhi. Lingel, along with its German R&D team, undertook development and onsite planning with the steel contractor, and took the entire responsibility of fabrication for each window as per actual size, due to onsite fabrication tolerances of the steel sub-frames.

GIZ Headquarters

Fact File

Profile surface:LINGEL-Dimex
Glass: Saint Gobain
Glass Processor: Kainath Bhiwadi
Hardware: Siegenia & Lingel SS 304
Design Software: PrefCo Germany
Silicon:McCoy Sudal
Fixing Fastener: Wuerth Germany
Fabrication Machine: URBAN Germany
Total Value of Façade: ₹ 40 lakh
Total Façade/Door Window Area: 167sqm

Unique features
Benefits
Parameter Details of Impact
Thermal transmission All windows are double glazes with Ug 2.8w/sqmK, Frame 1.8w/sqmK
Acoustic value

Triple glazed unit provides a tested noise reduction from 75dB outer air traffic noise to 45deb inside the office

Air permeability Not tested and no specific requirement. But all casement and fixed glazing with double gasket sealing are considered and tested air tight
Water permeability

Not tested and no specific requirement for this residence villa from customer’s end. Condition is actual monsoon-proof as there was no water entry during rains  


Execution and Timeline

All our products are fabricated as per actual size.

Responsibility of correct measurements are with Lingel only.

Our site team coordinates with the civil contractor, other relevant agencies, architects and provides the final action plan to the customer / project management.

This project went very well on time as coordination was done directly with German in-house Architect Roth. Work could happen only on Saturday and Sunday at predefined location as the office had to be kept empty. Work executed under running condition.

Quality

Lingel is certified ISO 9001/2015 since 2010. Fabrication of windows and doors is done as per UWDMA guideline and UWDMA proposed BIS standard for uPVC doors and windows as well as EN 12608.
Click Here
To Know More / Contact The Manufacturer
Please provide your details we will contact you as soon as possible
Please let us know your name.
Invalid Input
Please let us know your Designation.
Invalid Input
Please let us know your City.
Please let us know your State.
Please let us know your Country.
Please let us know your Contact Number.
Please let us know your email address.
Please brief your query.